Leather-based belts are a wonderful craft challenge for these new to leather-based crafts. Other than being one of many simpler craft initiatives, additionally they make good presents. Opposite to what you might consider, it’s really fairly simple to make a leather-based belt rivets for leather B09LCBPWWD.
First, buy leather-based and a belt buckle. If you happen to plan to instrument or dye the leather-based, it’s perfect to decide on a vegetable leather-based. This sort is less complicated to work with than other forms.
Be aware the width of the within of the belt buckle. Measure the waist circumference of the person who shall be carrying the belt. Utilizing a razor knife, minimize the leather-based. The width shall be that of the within of the belt buckle and the size one foot longer than the waist circumference measurement. To make sure a fair minimize, use a straight edge similar to yardstick. The top of the belt that shall be fed by way of the belt buckle may be minimize to your choice. Many individuals wish to spherical the top.
On the opposite finish of the belt, fold the leather-based again 1 ½ inches to create a crease. Line up a slot punch with the middle of the crease. Maintain the punch firmly by the deal with and use a picket mallet to hammer it in till the leather-based has been punctured totally.
Utilizing a rotary or drive punch, make two rivet holes ¼ inch from the top of the belt earlier than the crease. The holes ought to be ¼ inch from all sides of the belt. Fold again the belt on the crease and mark the place the rivet holes overlap the leather-based. Make two extra rivet holes the place you’ve gotten marked. When the belt is folded on the crease, the rivet holes ought to completely align.
Use a belt beveller to trim belt edges clean. If you happen to plan to embellish the belt, achieve this now. Instruments and design stamps can be utilized so as to add particular person touches to the leather-based. Some folks select so as to add studs. Use a leather-based dye to paint the belt. Understand that the dye within the container might seem distinctly completely different from the completed model. When selecting a dye, take a look at completed samples to make certain you might be getting the colour you need.
Enable dye to dry utterly, flexing the leather-based often in the course of the drying course of. This can make sure the fibers don’t stiffen up an excessive amount of. It could take as much as a number of hours for dyed leather-based to dry utterly. As soon as dry, clean with Neat’s foot oil or saddle cleaning soap and buff dry with a clean material.
Push the prong of the belt buckle by way of the outlet made within the crease. Fold the leather-based again and align the rivet holes. Insert rivets from the within of the belt and apply rivet caps utilizing a rubber mallet.
Placed on the belt and decide the place a gap is required to make sure a cosy match. Use a rotary punch to punch a gap that’s centered from the perimeters of the belt. Working from this punched gap, punch a collection of holes 1 inch aside.
