Measuring for and hanging curtains is simple in lots of conditions and might be completed by anybody competent in DIY (do-it-yourself).

Nonetheless, there are some conditions the place it’s advisable to make use of an skilled. These embrace:

• Bay home windows
• Slot home windows; very slim, tall home windows
• Home windows with out enough wall area above the window for a pole/observe
• Home windows with out wall area or on both facet
• Non-rectangular home windows (e.g. round, triangular,)

However for many conditions you can be utilizing both a curtain observe or pole throughout a flat rectangular window. So there are solely two measurements of significance. When measuring use a sturdy metallic tape measure, have a spirit stage useful to verify whether or not poles, batten, flooring and many others are actually stage. Use correct secure steps in case you are working at top and for giant home windows have an assistant maintain the opposite finish of the tape. The outdated adage “measure twice and lower as soon as” holds true!

Measuring curtain width

Begin by measuring the width of the window horizontally throughout the recess occupied by the window & its body. [Note the width of a window is not the width of the glazing.] Now add 20-30cm (8-12″), on either side for the reason that observe or pole ought to prolong past either side of the window to allow the curtains to be drawn effectively again. A big window has extra cloth within the curtain and so wants extra space both facet to tug again fully. If there’s inadequate area on both facet of the window you’ll have to regulate your design and it will be higher to get some skilled help.

You could discover a pre-existing picket batten above the window and this could equally prolong past the window aperture. If it doesn’t it’s possible you’ll think about changing or extending the batten. If you’re becoming a observe then the batten will probably be helpful, whereas in case you are becoming a pole the batten might be an obstruction. While you purchase a pole make it possible for the pole size (distance between finials) is the same as or larger than the required width and guarantee which you can lower the pole size right down to the specified measurement.

Measuring curtain drop

Curtain drop is the space between the highest and backside of the material within the completed curtain, and it relies on the model of curtain heading, positioning of the pole or observe and the place of the underside of the curtain. When putting in a curtain pole goal to place it above the window in order that the highest of the curtain cloth is at the least 10cm / 4inches above the highest of the window recess.

• Curtain Poles with rings: As a rule the highest of the curtain needs to be slightly below the rings so measure the drop from the underside of the ring.
• Curtain pole with eyelet curtains: On this scenario there aren’t any curtain rings and the highest of the curtain will probably be above the pole. Measure the drop from the highest of the pole and add 3.5cm to aloe for the quantity of curtain that will probably be above the pole.
• Curtain poles with tab high curtains measure drop from the highest of the pole 서초커튼.

For all curtains it is advisable resolve the place the underside will end:

• Sill size: the curtain ought to end 1cm above the sill (however be aware that this can let extra light into the room).
• Beneath sill size; usually curtains end half approach between the sill and a wall mounted radiator. Generally they hold over the radiator however this channels heat air up behind the scenes and so doesn’t assist maintain the room heat. Determine the place you need the material to finish.
• Full size; the curtain finishes 1.5cm above the ground. This measurement wants precision as a result of many flooring should not completely stage. Measure the drop from an put in pole or observe in three locations, the centre and to the left & proper. Work with the smallest measurement however double verify that the observe or pole is stage. If unsure verify the slope of the ground.
• Pooled; in contrast with full size curtains these often have an additional 30cm /12 inches of cloth to pool onto the ground

Lastly 

After you have width and drop give these figures to your curtain maker who will be capable to calculate the amount of cloth you have to and the price of making up the curtains. Additionally, you will must agree on the curtain heading and on the kind of lining on your curtains. All this will appear exhausting work however you’ll find yourself with bespoke made to measure curtains that suit your window completely; one thing that manufacturing unit made curtains hardly ever can obtain.