Measuring for and hanging curtains is easy in lots of conditions and might be performed by anybody competent in DIY (do-it-yourself).

Nevertheless, there are some conditions the place it’s advisable to make use of an professional. These embrace:

• Bay home windows
• Slot home windows; very slender, tall home windows
• Home windows with out ample wall house above the window for a pole/monitor
• Home windows with out wall house or on both facet
• Non-rectangular home windows (e.g. round, triangular,)

However for many conditions you’ll be utilizing both a curtain monitor or pole throughout a flat rectangular window. So there are solely two measurements of significance. When measuring use a sturdy metallic tape measure, have a spirit stage useful to test whether or not poles, batten, flooring and many others are really stage. Use correct protected steps if you’re working at top and for giant home windows have an assistant maintain the opposite finish of the tape. The previous adage “measure twice and reduce as soon as” holds true!

Measuring curtain width

Begin by measuring the width of the window horizontally throughout the recess occupied by the window & its body. [Note the width of a window is not the width of the glazing.] Now add 20-30cm (8-12″), on both sides for the reason that monitor or pole ought to prolong past both sides of the window to allow the curtains to be drawn nicely again. A big window has extra material within the curtain and so wants extra space both facet to drag again fully. If there may be inadequate house on both facet of the window you will have to regulate your design and it could be higher to get some professional help.

It’s possible you’ll discover a pre-existing picket batten above the window and this could equally prolong past the window aperture. If it doesn’t you could take into account changing or extending the batten. If you’re becoming a monitor then the batten might be helpful, whereas if you’re becoming a pole the batten might be an obstruction. If you purchase a pole be sure that the pole size (distance between finials) is the same as or better than the required width and guarantee that you could reduce the pole size right down to the specified measurement.

Measuring curtain drop

Curtain drop is the space between the highest and backside of the material within the completed curtain, and it is dependent upon the model of curtain heading, positioning of the pole or monitor and the place of the underside of the curtain. When putting in a curtain pole purpose to place it above the window in order that the highest of the curtain material is a minimum of 10cm / 4inches above the highest of the window recess.

• Curtain Poles with rings: As a rule the highest of the curtain needs to be just under the rings so measure the drop from the underside of the ring 용인커튼.
• Curtain pole with eyelet curtains: On this state of affairs there are not any curtain rings and the highest of the curtain might be above the pole. Measure the drop from the highest of the pole and add 3.5cm to aloe for the quantity of curtain that might be above the pole.
• Curtain poles with tab prime curtains measure drop from the highest of the pole.

For all curtains that you must determine the place the underside will end:

• Sill size: the curtain ought to end 1cm above the sill (however observe that this can let extra light into the room).
• Under sill size; usually curtains end half manner between the sill and a wall mounted radiator. Typically they dangle over the radiator however this channels heat air up backstage and so doesn’t assist maintain the room heat. Resolve the place you need the material to finish.
• Full size; the curtain finishes 1.5cm above the ground. This measurement wants precision as a result of many flooring will not be completely stage. Measure the drop from an put in pole or monitor in three locations, the centre and to the left & proper. Work with the smallest measurement however double test that the monitor or pole is stage. If unsure test the slope of the ground.
• Pooled; in contrast with full size curtains these often have an additional 30cm /12 inches of material to pool onto the ground

Lastly 

After getting width and drop give these figures to your curtain maker who will be capable of calculate the amount of material you will want and the price of making up the curtains. Additionally, you will must agree on the curtain heading and on the kind of lining in your curtains. All this will appear exhausting work however you’ll find yourself with bespoke made to measure curtains that suit your window completely; one thing that manufacturing facility made curtains not often can obtain.